McMaster 5969A13 Dead Blow Mallet PVC Plastic Face, Fiberglass Handle, 2-3/4 lbs. 4TA34 83 gph @ 90 Degrees

83 gph @ 90 Degrees F

The Proto J7410MT Impact Socket is a must-have for any professional tool collection

ISO 868 Full Cure Time 6 hr Product Form Paste Working Time 20 min VOC Content Weight Percentage 1 % Minimum Application Temperature 20 Degrees F Product Type Putty VOC Content+1 10 g/L Base Material Epoxy For Use On Surface Material Metal Flash Point 300

Standard Features:

Spray Series 4570 Coverall Style Hooded Cuff Style Elastic Includes Outer Boot Flaps No Pathogen and Chemical Ratings Meets ASTM F1671:2013

McMaster 5969A13 Dead Blow Mallet PVC Plastic Face, Fiberglass Handle, 2-3/4 lbs. 4TA34 83 gph @ 90 DegreesThe head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making