11 IN - Plastic Overlay Depth Marker - 6 x 6 Inch with 4 Inch Lettering pool-shape_Rectangle This is a Filter Grid

This is a Filter Grid Element with Center Port measuring 18 x 19-5/16 inches

a maximum NSF flow rate of 94

This is a Stenner Innermost QuickPro #1 Pump Head rated at 25 PSI for Classic 100 and 170 pumps

The pool where this board will be installed MUST have diving-well dimensions that conform to U

If the water pH is too far one way or the other

11 IN - Plastic Overlay Depth Marker - 6 x 6 Inch with 4 Inch Lettering pool-shape_Rectangle This is a Filter GridThis plastic depth marker tile states 11 IN. It has an overall size of 6 x 6 inches which will fit over standard ceramic pool depth marker tiles. Our tempered Plastic Overlays are made for the waterline depth in your pool. They have beveled edges, a smooth surface, and a thin profile. They can be installed over most surfaces including tile, fiberglass, paint, vinyl liner, etc. Overlays are used to go over existing tile depth marking that has faded or